Electrostatic spraying equipment has the following requirements for the work site, please take a look:
1, where the use of toxic, irritant and inflammable material process should be placed in a separate plant, or arranged in the plant specifically separated from the lot, and equipped with personal protective equipment and fire equipment.
2. The passageway in the workshop shall be equipped with facilities to eliminate ventilation and prevent the spread of fire, such as automatic fire door, fire and smoke baffle, water curtain, etc.
3. When it is necessary to reach the work station above the equipment safely, an overpass with protective railings and stairs should be installed. The ground of the workshop and the passage of the bridge should be laid with anti-slip ground.
4. There shall be no stacking equipment, objects and wires across the pedestrian passage, and the width of the passage shall not be less than 1m.
Fifth, the assembly line walks in the work area overhead in the following must lay the protective net, prevents the object to fall.
6, the excess paint and waste paint, should be piled up in isolation in the special paint warehouse.
Electrostatic spraying is a method to make atomized particles take a negative charge in the dc high-voltage electric field, and then under the action of electrostatic field, fly to the surface of the sprayed with positive charge in a directional way, and deposit a uniform and firm coating film. Electrostatic powder coating is the leading powder coating method in the field of industrial coating. After long-term research and experiments, it is found that electrostatic powder coating is the cleanest coating technology that can be achieved at present. Electrostatic powder spraying effect in mechanical strength, adhesion, corrosion resistance, aging resistance is better than painting process, electrostatic spraying equipment process advantages, the following crescent coating for you to introduce.
1. One coating can get a thicker coating, with general common solvent coating, about 4 to 6 times, and with powder coating can reach the thickness one time. The corrosion resistance of the coating is very good.
2. The powder coating does not contain solvent and has no pollution caused by three wastes, which improves the environmental problems of the workshop.
3. Adopt new process of powder electrostatic spraying, high efficiency, suitable for automatic assembly line painting, high powder utilization rate, recyclable. The great cyclone efficient recovery system of 98.9%, for customers to completely solve the problem of powder spill. Quick color change and powder supply center, color change time only 10~15 minutes, saving a lot of time for customers.
Powder coating began to be used for protection and electrical edge, with the development of science and technology, has been widely used in the automobile industry, electrical insulation, corrosion resistant chemical pumps, valves, cylinders, pipelines, outside the steel components, steel furniture, casting surface coating.
